Automatic Dialing To Friends Or Neighbours
If the alarm is not disarmed within the few seconds using one of the security coded remote controls, the security system console automatically dials up to four friends or neighbours and plays a message that the homeowner records.

The listener then has the option of pressing a key on his or her phone to activate a microphone on the console to listen in.

Self-Checking, Fully Supervised System
Every sensor installed is self-checking, and if any fail to report in to the base console at the correct time interval, the sensor's zone indicator on the alarm console flashes an alert.

If the owner tries to arm the system, a special warning tone is sounded, and a button must be pressed to acknowledge and bypass the warning before the arming sequence can be completed.

X-10 Home Automation Compatible
Adding X-10 Home Automation products such as Lamp Modules, Appliance Modules and Replacement Wall Switches is easy with this system, since it is already compatible with the full range of X-10 Home Automation products.