Description

Monitor four zones with any combination of a remote temperature, humidity or water sensing probe. If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.
This advanced monitoring and alarm device provides precise monitoring of critical environments by utilizing an on-board temperature sensor or attaching any one of the remote temperature, humidity and water sensing probes. Receive dual sensor coverage from simultaneous operation of the local and remote sensors. If either sensor being monitored deviates from the preset limits, a relay output sends a signal to an appropriate warning system.
Features:
- Data logging - capture and download sensor readings, alarm and event history
- Simultaneous operation of eight sensors
- Defrost time delay up to 120 minutes
- Easy to read large LCD display
- Auxiliary output relay for local audible alarm
- Auxiliary alarm silence feature with 10 minute timer
- Temperature & humidity Hi / Lo set points
- Output relays can be configured to be initially energized or de-energized
- Tamper proof password lock setting
- Snap fit mounting base with main housing for easy access
- Plug in terminal strip connectors for easier wire termination
- Current sensor readings are displayed on home screen
- Sensor configuration retained in memory if power is lost
Winner of the 2008 Security Industry Association (SIA) New Product Showcase Product Achievement Award in the Intrusion Detection and Prevention category
Specifications:
- Console Size: 8.13” x 5.52" x 1.93" (20.6 cm X 14.0 cm X 4.9 cm)
- Weight: 1.0 lb
- Lo & Hi Limit Adjust Range
-
- Temperature -112° F to +302 ° F
- Humidity 5% to 95% Relative Humidity
- Input Voltage: +11 to +26 VDC @ <500mA
- Number of wireless sensor inputs: 4
- Number of wired sensor inputs: 4
- Unit Operating Range: +32 to +122° F
- Alarm Outputs: 8 - SPDT Relays (Configurable)
- Auxiliary Audible Alarm Output: 1 - SPDT Relays (Non-configurable)
- Case Material: ABS
|