Monitor two zones with any combination of a remote temperature, humidity or water sensing probe.

This advanced monitoring and alarm device provides precise monitoring of critical environments by utilizing an on-board temperature sensor or attaching any one of the remote temperature, humidity and water sensing probes. Receive dual sensor coverage from simultaneous operation of the local and remote sensors. If either sensor being monitored deviates from the preset limits, a relay output sends a signal to an appropriate warning system.

If temperatures and humidity deviate from the preset limits or water forms a bridge between the contacts on the WaterBug® sensor the designated relay for each zone will activate an alarm, dialer, transmitter, etc.

Features

• Simultaneous operation of both zones
• Defrost time delay up to 120 minutes
• Easy to read large LCD display
• Eight event alarm memory with time and date
• Auxiliary output relay for local audible alarm
• Auxiliary alarm silence feature with 10 minute timer
• Each zone has offset calibration adjustment
• Temperature & humidity Hi / Lo set points
• Output relays can be configured to be initially energized or de-energized
• Tamper proof lock setting
• Snap fit mounting base with main housing for easy access
• Plug in terminal strip connectors for easier wire termination
• Zones being monitored are displayed every few seconds
• Display F°, C°, % (Humidity) or Water Drop icon
• Zone configuration retained in memory if power is lost

Specifications

• Dimensions: 6.0” x 4.75 x 1.25
• Weight: .55 lb
• Lo & Hi Limit Adjust Range: -58 to +299° F
• Input Voltage: 12 VDC @ <200mA
• Number of sensor inputs: 1
• Unit Operating Range: +32 to +122° F
• Alarm Outputs: 2 - SPDT Relays (Configurable)
• Auxiliary Audible Alarm Output: 1 - SPDT Relays
  (Non-configurable)
• Case Material: ABS