Description
Security Now Has a Voice
Add a Telephone Dialer to Any Alarm System
In areas where Security System Monitoring is not available let the sophisticated Paravox Voice Dialer take over.
The Paravox Voice Dialer will verbally report system status by phone advising of detection of burglary, fire, flood, or any other situation programmed to report a condition.
User-Friendly Operation
Fully programmable over the telephone (no external keypad required) the Paravox guides the end user through all system functions with a full set of voice prompts.
All the user needs to remember is their P.I.N. The "key ahead" feature eliminates the frustration and time wasted for experienced operators by allowing them to key in selections before a prompt ends.
Enhanced Communications
With 4 zone inputs that can be linked to 4 different 32-digit telephone numbers (designated voice or pager) delivering 4 different messages no other voice dialer matches the communication capabilities of the Paravox.
Dial-out priority can be preset so the dialer contacts the most important number first. Message length can be programmed at 2 x 20 seconds or 4 x 10 seconds based on user requirements. Dialer languges other than English are also available.
Automation Advantages
The Paravox's two programmable outputs can be used for remote device activation by telephone opening up a world of possibilities in home or office automation.
Turn on air conditioning or heat extinguish lights activate a sprinkler system open a garage door - all of these and more can be done using the programmable outputs of the Paravox.
Specifications User Manual (PDF)
-
Input voltage: 10 Vdc - 14Vdc (12.5Vdc typical)
-
Current consumption: 100mA typ. 200mA max. (with 2 PGMS enabled)
-
Zone inputs: 4 programmable: N.C./N.O. EOL (1K/2K) or 12 VDC input
-
PGM outputs: 2
-
Power consumption: 1 Watt
-
PGM output current: 30mA ma
-
Operating temperature: 0° to 50°C (32°F to 122°F)
-
Dialing modes: Pulse DTMF
-
LED indicator: 3 LEDs - green "ok". yellow "busy" red "pulse"
-
Message storage length (sec.): 4 x 10 or 2 x 20
-
Voice quality: 5.3 Khz sample rate with
-
NOTE: Will not work in the event of a power outage..
12V DC Power Supply Required
|